Pattern gen.

Pattern generator


	This pattern generator allows to work with an arbitrary sequence of pulses of 0.5 ns minimum width. We use this instrument to trigger the high-frequency switch in puseld-measurements.




		Features · Single-/dual-channel Pulse Pattern generator. · 165 MHz, 10 V, 50 Ohm into 50 Ohm (81111A) OR · 330 MHz, 3.8 V, 50 Ohm into 50 Ohm (81112A) · Triggerable / PLL operation selectable · Pulse / burst / pattern modes selectable · Self-cal for improved timing accuracy · BNC outputs: single-ended (81111A) // differential (81112A) .

The Agilent 81110A 165 MHz single-/dual-channel Pulse Pattern Generator with one or two Agilent 81111A ouput modules:

This model replaces the "industry-standard" Agilent 8110A with better performance for less money. Relative to the Agilent 81104A, it has the same features with higher frequency. Delay and pulse width (and repetition rate in non-PLL mode) are more accurate - of the order of 3% or, with self-calibration, 0.5%.

The Agilent 81110A 330 MHz single-/dual-channel Pulse Pattern Generator with one or two Agilent 81112A output modules:

The alternative 81112A Output modules allow the 81110A to be used in applications up to 330 MHz. Instead of variable transitions, 800 ps or 1.6 ns edges can be selected. The source impedance is 50-ohm and supplies up to 3.8 Vpp into 50 ohms. Internal channel addition is not implemented.